Aluminati Can Crusher FAQ's

  • What is the power source for the Aluminati?

    The Aluminati Can Crusher operates off compressed air, crushing the cans with the push of your foot on the pedal.

Can-I-Bus FAQ's

  • Can I depalletize other containers?

    ABSOLUTELY!  The awesomeness of the Can-I-Bus does not stop at aluminum.  The Can-I-Bus can also depalletize plastic or even composite materials.  If your looking for a glass depalletizer click HERE

  • What type of pallet jack do I need for can pallets?

    Click HERE

  • What are the power requirements for the Can-I-Bus?

    The Can-I-Bus requires 208-3 phase power OR 220 volt single phase 20 amp circuit.  There is also a 480 volt option available.

  • Do I need a conveyor?

    Yes, it is sized according to your canning line.  Need help with your conveyance design?  We can help with that too, click HERE!

  • How much does the Can-I-Bus cost?

    GREAT question!!  Click HERE

  • What speeds does it run?

    The Can-I-Bus can run up to 400 cans per minute (CPM) with proper conveyance.  Need help getting your conveyance proper?  We can help with that too!

  • How high is the Can-I-Bus?

    The Can-I-Bus is super high bro…wait what were we talking about?  Oh ya! The Can-I-Bus stands 135″ tall and needs 155″ tilt-up height.  Is 135″ too high?  Click HERE  Don’t forget that custom sizes are also available.

D.I.C.S. Date Inline Coding System FAQ's

  • What are the pieces of the D.I.C.S. conveyance?

    The D.I.C.S. Conveyor is comprised of conveyance, a Markem Imaje Date Coder (stamps the date on the bottom lip of the can), Ska Fab Air Blaster, Filtech Low Fill Detector, dryer and can rinse.  These are all modular systems and you can pick and choose which quality control components you want, as well as the length of your conveyor.  Worried about your conveyance configuration?  Don’t fret…Click HERE

Short Bus FAQ's

  • Can the Short Bus depalletize other containers?

    It certainly can (pun intended;)!  The Short Bus can also depalletize plastic or even composite materials.  Are you looking for a low level glass depalletizer?  Click HERE

  • What type of pallet jack do I need for can pallets?

    Click HERE

  • Does the Short Bus need a conveyor?

    It sure does, and guess what?  We INCLUDE a custom conveyor with the Short Bus! (High-five)

  • What are the power requirements of the short bus?

    The Short Bus needs your average 110 volt power, how awesome is that?!

  • How fast does the Short Bus go?

    The Short Bus travels at speeds up to 50 cans per minute (CPM)

Snodgrass FAQ's

  • What type of pallet jack do I need?

    You will need a standard pallet jack.

  • What are the power requirements?

    The Snodgrass requires 208-230 volt 3 phase power- 30 amp draw.

  • How fast does the Snodgrass run?

    He doesn’t run very fast, but he can operate at a whopping 300 bottles per minute (BPM)

Terms & Conditions

  • Terms, Conditions & Privacy (because we gotta have ’em)

    Skafabricating.com Terms & Conditions

    If you continue to browse and use skafabricating.com you are agreeing to comply with and be bound by the following terms and conditions of use, which together with our privacy policy govern Ska Fabricating’s relationship with you in relation to this website.

    The term ‘Ska Fabricating’ or ‘us’ or ‘we’ refers to the owner of the website whose registered office is 13589 CR 213 Durango CO 81303. The term ‘you’ refers to the user or viewer of our website.

    The use of this website is subject to the following terms of use:

    The content of the pages of this website is for your general information and use only. It is subject to change without notice.

    Neither we nor any third parties provide any warranty or guarantee as to the accuracy, timeliness, performance, completeness or suitability of the information and materials found or offered on this website for any particular purpose. You acknowledge that such information and materials may contain inaccuracies or errors and we expressly exclude liability for any such inaccuracies or errors to the fullest extent permitted by law.

    Your use of any information or materials on this website is entirely at your own risk, for which we shall not be liable. It shall be your own responsibility to ensure that any products, services or information available through this website meet your specific requirements.

    This website contains material which is owned by or licensed to us. This material includes, but is not limited to, the design, layout, look, appearance and graphics. Reproduction is prohibited other than in accordance with the copyright notice, which forms part of these terms and conditions.

    All trademarks reproduced in this website, which are not the property of, or licensed to the operator, are acknowledged on the website.

    Unauthorized use of this website may give rise to a claim for damages and/or be a criminal offence.

    From time to time this website may also include links to other websites. These links are provided for your convenience to provide further information. They do not signify that we endorse the website(s). We have no responsibility for the content of the linked website(s).

    You may not create a link to this website from another website or document without Ska Fabricating’s prior written consent.

    Skafabricating.com Privacy Policy

    Thank you for visiting skafabricating.com. This privacy policy tells you how we use personal information collected at this site. Please read this privacy policy before using the site or submitting any personal information. By using the site, you are accepting the practices described in this privacy policy. These practices may be changed, but any changes will be posted and changes will only apply to activities and information on a going forward, not retroactive basis. You are encouraged to review the privacy policy whenever you visit the site to make sure that you understand how any personal information you provide will be used.

    Note: the privacy practices set forth in this privacy policy are for this web site only. If you link to other web sites, please review the privacy policies posted at those sites.

    Collection of Information
    We collect personally identifiable information, like names, postal addresses, email addresses, etc., when voluntarily submitted by our visitors. The information you provide is used to fulfill your specific request. This information is only used to fulfill your specific request, unless you give us permission to use it in another manner, for example to add you to one of our mailing lists.

    Cookie/Tracking Technology
    The Site may use cookie and tracking technology depending on the features offered. Cookie and tracking technology are useful for gathering information such as browser type and operating system, tracking the number of visitors to the Site, and understanding how visitors use the Site. Cookies can also help customise the Site for visitors. Personal information cannot be collected via cookies and other tracking technology, however, if you previously provided personally identifiable information, cookies may be tied to such information. Aggregate cookie and tracking information may be shared with third parties.

    Distribution of Information
    We may share information with governmental agencies or other companies assisting us in fraud prevention or investigation. We may do so when: (1) permitted or required by law; or, (2) trying to protect against or prevent actual or potential fraud or unauthorized transactions; or, (3) investigating fraud which has already taken place. The information is not provided to these companies for marketing purposes.

    Commitment to Data Security
    Your personally identifiable information is kept secure. Only authorized employees, agents and contractors (who have agreed to keep information secure and confidential) have access to this information. All emails and newsletters from this site allow you to opt out of further mailings.

    Privacy Contact Information
    If you have any questions, concerns, or comments about our privacy policy you may contact us using the information below:

    By e-mail: info@skafabricating.com
    By Phone: 970-403-8562
    We reserve the right to make changes to this policy. Any changes to this policy will be posted.


Twist Rinse FAQ's

  • What size cans will fit in the Twist Rinse?

    Multiple sizes will fit, we can customize the Twist Rinse to accommodate any sized can, or plastic, or composite materials.

  • I have a really tight space, can the Twist Rinse maneuver in small spaces?

    You bet it can!  The Rinse Cage can come straight off the conveyor from the Can-I-Bus depalletizer or at a 90 degree angle.

  • What kind of “Rinse” is in the Rinse Cage?

    The Rinse Cage can be set up with a chemical supply or the facility’s preferred water source.

  • How many CPM can the Twist Rinse Cage run?

    The Twist Rinse Cage can run up to 100 CPM.  It also has a quick and easy changeover for different sized cans.