SEMI-AUTO BAGGERS

REAR & SIDE LOAD

Semi-Automatic Bagger

Built to provide years of dependable operation, the semi-automatic bagger is a cost effective and efficient method for bagging empty plastic bottles. Convenient and economical, the bagging system encloses single layers of bottle rows into easily handled, sanitary sealed plastic bags. Ska Fab offers the semi-auto bagger in rear load and side load configurations. 

STEPS OF OPERATION

  1. Bags are manually placed onto the bagging clamps by the operator.

  2. A live feed conveyor automatically transports the containers into the bagger where they are collated into rows.

  3. The semi-automatic bagger pushes the bottles into the bag when the operator signals that the machine is ready.

  4. The bag is then sealed by dual activated push buttons for operator safety.

  5. Bagged bottles can then be easily stacked for storage and/or shipping.

CONTROLS SPECS

  • Configuration:
    • Rear load
    • Side load
  • Bag size – Adjustable configuration to accommodate various bag sizes
  • Power requirements – 115V, Single phase, 50 to 60Hz
  • Air requirements – Minimum 80 psi
  • Control panel
    • Operator touch screen interface
    • Allen Bradley CompactLogix
  • Construction
    • Welded steel
    • Enclosed frame with door safety switches
    • Stainless steel bottle contact surface
  • Optional table top conveyor – 3 1/4” table top infeed conveyor with drive and idler
  • Standard pack size – 36” x 48” (reconfigurable)

SERVO PERFORMANCE & DEPENDABILITY

  • Operator can precisely control the pushing and handling of different size containers

  • No mechanical adjustments needed on the push assembly

  • No adjusting flow controls for pusher speed

  • Operator can program different row push speeds and main fill push speed

  • Operator can set the return location for different sized containers