Manual Tilt Palletizer

Manual Tilt Palletizer

The manual tilt palletizer from Ska Fab makes palletizing operations simple, efficient and ergonomically friendly.  Easily operated controls adjust the unit to an optimal loading angle (and height) to ensure a consistent and safely palletized stack, one layer at a time.  Twin pneumatically actuated cylinders properly position loads weighing up to 600lbs.  Only air, no electrical is required to operate the unit.

Unit is engineered to palletize a variety of stack dimensions, configurations, and product types due to the adjustable side panel design.  Adjustable walls allow for 40” x 48” and 44” x 56” sized pallets. Optional features to accommodate pallet strapping ensure loads are safely secured prior to transit or storage.  For relocating the unit, further mobility is offered with an optional caster wheel kit

TECH SPECS

Construction
  • Framework – welded and powder coated steel and aluminum
  • Side and back panel – 1/8” thick aluminum sheet metal. *Starting October, 2020, the side and back panel will no longer be black but will stay natural aluminum.
Cylinder and Air Supply
  • Tilt cylinders – twin pneumatically operated tilt cylinders (64″ stroke) (3-year manufacturers warranty)
  • Rod-less pallet lift cylinder (3-year manufacturers warranty)
  • Air supply – minimum 80 psi
Pallet
  • Load weight – up to 600lbs.
  • Size/range – 48″ – 56″L / Up to 44″W
  • Stack height – Up to 103″
Controls

Conveniently mounted on the safety fence

Rear Contact Surface

Retracting slider bed cover case and pallet lowering forks provide positive pallet contact surface

Safety Fencing

Powder coated black wire mesh fence with yellow posts (180″L x 74.5″H)

OPERATING INSTRUCTIONS

  • Load the pallet into the palletizer
  • Tilt the palletizer into the loading position
  • Place the containers onto the palletizer
  • Press the foot pedal to lower the forks for stacking the next layer of containers
  • Repeat the process until a full pallet is achieved
  • Band to ensure the load is secure
  • Signal the unit to tilt back to it’s full upright position
Manual Tilt Palletizer Features & Specifications:
MANUAL TILT PALLETIZER

Options

Play Video
Side Pallet Banding
  • Two (2) manual strap dispensers for 3/8″ – 3/4″ plastic strapping material
  • Manual strap threading tool for inserting strapping material through the pallet
  • Two (2) manual strap clamps to hold the loose end of the strap while loading pallet
Play Video
Hand Cart/Caster Wheel Kit

Allows for the lifting of one end of the palletizer for easy relocation.

Custom Powder Coated Color & Logo Decal
  • Customize the color of the frame for a look that matches your brand
  • Quality vinyl cut printed logo applied to both sides of the tilt palletizer