Can Depalletizers The Original Small Footprint Can-i-Bus • Available in Custom Height Configurations

The Ska Fabricating™ Can Depalletizer is the original, small footprint, semi-automated depalletizer. It is designed with space and cost in mind and is capable of depalletizing multiple sized packages of aluminum and metal containers. The Can-i-Bus Depalletizer is fully automated once the pallet is inserted and the straps and tier frame are removed. Works with all canning lines running at 25 to 600 cans per minute with proper accumulation and conveyance.

Depalletizer Standard Features:

  • Numerous configurations available to best fit your space
  • Multiple voltage options available
  • Dimensions:72" x 51" x 134"
  • 155" ceiling clearance (to stand machine)
  • Metric: 1829 mm x 1295 mm x 3404 mm, 3937 mm ceiling clearance
  • Category 3 safety doors with Solenoid Interlock
  • Tier sheet catch (as shown)
  • Will accommodate full height or smaller pallets
  • Capable of depalletizing aluminum or metal containers
  • Speeds from 25 CPM to 600 CPM (with the proper conveyance and accumulation)
  • Loads with a pallet jack
  • Minimal air consumption (<1 CFM @ 20 PSI) (<.03cmm @ 2 Bar)
  • Automated tier sheet removal
  • User friendly touchscreen controls - Siemens PLC

Options:

  • CE certification package
  • Vertical Height Sensor (see below)
  • Depal Pal - Tier sheet storage bin (floor mount)
  • Heavy duty work platform
  • Twist rinse cage with 1/4” (6.35mm) stainless rod guide rails & stainless rinse tunnel
  • Variety of discharge conveyor options best suited for packaging line speeds
  • Custom color choices available
  • Stainless Steel

 

Vertical Height Sensor (Optional):

The Vertical Height Sensor (VHS) is available for new Can-i-Bus depalletizers. It's an automated system for switching can sizes on lines that depalletize 3 or more container sizes. Using the VHS, can sizes can automatically be programmed and stored in the Can-i-Bus HMI controller.

How it works: A piston with a padded disc is pushed up by the cans.  A laser measures the distance between the top frame of the Can-I-Bus and the disc.  When the laser sees that the cans make contact with the disc, the lift is automatically slowed down.  When the laser measures the correct distance for the specific can being run, the lift stops and the piston retracts the disc out of the way so the Can-i-Bus can sweep the cans.

  • Easily set up new can sizes
  • Quick change over of can sizes (done on HMI rather than a ladder)
  • No limit of can sizes
  • Pinpoint accurate lift stopping position for smooth can transfer

Custom Height Depalletizer

Our can depalletizer is available in custom heights.  It is designed for canners or breweries with space restrictions. It is designed for half pallets of aluminum or other metal containers.

Custom Height Depalletizer Standard Features:

  • Capable of depalletizing multiple sized packages of aluminum or metal
  • Speeds from 10 CPM up to 300 CPM with proper accumulation
  • Loads with a slim profile pallet jack or forklift
  • Numerous configuration options available to best fit your space
  • Minimal air consumption (<1 CFM @15 PSI)
  • (<30L/MIN @ 1.1 BAR)
  • Fully automated once pallet is inserted into the machine & the straps & tier frame are removed
  • Automated tier sheet removal
  • Custom height available for low clearance applications

Wide Variety of Optional Custom Colors Available

 

Depal Pal Tier Sheet Collection

Depalletizer Work Platforms

Can Depalletizer Video

 

Custom Height Depalletizer